A sex doll is a beautiful creation. They come from sculptural artists who make sure they can withstand it even if the owner doesn't swing them so carefully. But over time, sex dolls do damage, and while some of the damage is irreparable, some of it can be repaired if you know enough about how to fix it.
If you wish to repair a TPE doll, the first tool you will need is an infrared temperature gun. This tool is very useful because it provides real-time temperature feedback at the time of repair, as TPE is an extremely temperature-sensitive material.
One type of damage a sex doll can suffer is some dents due to its weight and impact. These dents can be the result of pressing an overweight object against the doll's surface or pulling too hard. Also, if it is not placed with the correct storage, it can do the same damage to the doll. However, don't worry about this kind of damage, as it only takes a few steps to repair the doll.
Apply a hot towel
This simple repair process only requires a warm towel to cover visible dents in the doll for a short period of time. Once the damaged area is hot, put on gloves and pat the damaged area with your hand, alternating these steps until it is flat and no longer visible.
Hair dryers seem to be useful for more than just our hair, and while most of us think of this tool only for drying wet hair, it's also an excellent way to restore your TPE doll.
All you need for this method is a clean, wet towel. To avoid smudging the doll, use a white cloth whenever possible, cover the dent with a damp towel, and heat it with a hair dryer. After continuous heating, you will notice that the indentation will begin to disappear gradually.
Repair bruises on realistic life size sex dolls
In addition to indentations, another common type of damage a sex doll can suffer is abrasions and tears, which can be repaired in several ways.
A step-by-step guide to restoring TPE sex dolls
Once you've found the tear, apply a small amount of TPE glue using a pointed tool. Then, pull the torn sides together and hold them for a few minutes until they are completely closed. Make sure the damaged area is completely clean before applying glue. Use 70% isopropyl alcohol cleaning solvent for this cleaning.
Use a spatula to evenly apply TPE glue to the inside of the tear, avoiding getting too much TPE glue on the spatula as it can cause too much glue to spread onto the doll's skin. After sealing the tear, wipe off excess glue with a clean cloth. Avoid using your fingers to remove the glue, as this can create unnecessary marks on the doll. Finally, leave the doll alone for 24 hours.
A step-by-step guide to restoring TPE sex dolls
Use a heat gun to smooth any scratches on the doll's surface.
The first thing to do is to clean the damaged surface of the doll with petroleum jelly or baby oil. In addition to cleaning, they also distribute heat more evenly. After applying baby oil or petroleum jelly, begin aiming the heat gun at the hyoon feet of the damaged area.
Pay attention to the distance between the heat gun and the doll's skin. Do not hold the gun too close, otherwise the doll's skin will be severely burned. Keep the distance at least 10cm. The TPE doll melting point is about 110℃. Once it starts to melt, you'll see a mirror-like glaze, where it stops depending on the smoke from heating.
Once heated to the right temperature, gently wipe the irregular scratches on the doll's surface with a clean cloth. Repeated heating and cooling several times will smooth the damaged area. It is worth noting that the temperature of the heated surface will drop very quickly. Therefore, wear and tear need to be removed as soon as possible after you stop using the heat gun.
You can repair facial cuts on a TPE sex doll using a similar process mentioned above. However, it takes a lot of practice to do it perfectly. You'll need the right tools as well as a steady hand to repair small cuts in the TPE doll.
You can repair facial wounds on TPE dolls using the methods mentioned above. However, it takes a lot of practice to get it perfect. In order to repair a small cut on a TPE doll's face, you'll need the right tools and steady handling.