How to use the vehicle lift platform? What is it used for?

Safety operation rules for vehicle-mounted lifting platform

1. Before use, remove the appliances and sundries that hinder the operation near the car lift, and check whether the operation handle is normal.

2. When supporting the vehicle, the four supporting angles should be on the same plane, and the height of the rubber pad of the supporting Angle should be adjusted to contact the supporting part of the vehicle chassis.

3. When supporting the vehicle, do not support the vehicle too steep, and the four supports should be locked after the support. Here's one man lift for sale.

d974d8e3858f60e7472153a22a1e2c8e4. After the lift vehicle enters, the support block of the lift should be adjusted to align it with the lifting point specified by the model.

5. When lifting, the personnel should leave the vehicle. When the elevator reaches the required height, the safety locking pin must be inserted to ensure safety and reliability before starting the bottom operation.

6, in addition to the minimum allowance and minor repair projects, additional tedious, tedious operations shall not be operated and maintained on the lift.

7, regularly remove the water in the car lifting cylinder, check the amount of oil. If the amount of oil is insufficient, it should be filled with pressure oil of the same brand in time. At the same time, you should check the elevator lubrication, transmission gear and joints.

The main uses of vehicle-mounted aerial work platform are as follows:

1, suitable for a large range of stations, docks, shopping malls and other high altitude continuous cargo transport;

2. ​work efficiency of airport terminals, aircraft maintenance, plant construction and logistics distribution;

3. ​street lamp maintenance, installation and repair;

4. ​maintenance and repair of power lines and lighting fixtures;

5, municipal garden pruning maintenance, etc.

Leave a Comment

Shopping Cart